標(biāo)題: 注釋翻譯---求助 [打印本頁] 作者: qukewei1980_200 時間: 2009-11-28 10:03 標(biāo)題: 注釋翻譯---求助 1.THEN REMOVE ALL OILS ,MOLD COATINGS, ECT. BY .SOLVEMENT CLEAING ,FINAL RINSE CLEAN SOLVENT.4 j3 q: B3 U' V' C& q
2.MASK SURFACES AS SHOWN ON DRAWING .8 D5 m+ A: N+ ~- w! |1 o( q
3.ABRASIVE OUTER SURFACES PER SSPC-SP10. % N. ^2 R# X7 m6 f$ m
NOTE: IF THE REQUIRMENTS FOR DISCOLORATION AND TO A SURFACE PROFILE OF 1.5 MILS CONFLICT CONCENTRATE ON PROFILE. 4 T# [ R3 w2 x( L
NOTE : MUST SIGN AFIDAVIT .NO MORE THAN 12 HOURS ELAPSED BETWEEN GRIT BLAST AND PAINT. 5 d+ g# ~# \+ W4.CLEAN OFF ALL DUST WITH A VACUUM. % @- k3 B& g* i4 U5.APPLY ONE COATING OF TNEMEC 140-1255(BEIGE) POLYAMIDOAMINE EPOXY ,PRIMER COAT ALL OVER 4 MILS DRY FILM THICKNESS 7 MILS WET FILM THICKNESS # e' c* a; H/ b( O6.FILL OUT PAINT QUALITY ASSURANCE FORM .+ q& |- \ y1 _, o4 E! g! u
7.AFTER PAINT IS DRY REMOVE THE MASKING.8 q$ `2 \0 Y+ l$ T
大家好，上面7句是關(guān)于油漆的說明，有哪位仁兄能幫忙翻譯以下，特別是第3，4，5，6條。小弟在此感激不盡