|
|
1.THEN REMOVE ALL OILS ,MOLD COATINGS, ECT. BY .SOLVEMENT CLEAING ,FINAL RINSE CLEAN SOLVENT. ]& E% u) ?) x' P6 N
2.MASK SURFACES AS SHOWN ON DRAWING .
' g1 Y4 \* T- i' y* p( r) N- v3.ABRASIVE OUTER SURFACES PER SSPC-SP10.
& |6 h, O7 [9 H. @( D- _NOTE: IF THE REQUIRMENTS FOR DISCOLORATION AND TO A SURFACE PROFILE OF 1.5 MILS CONFLICT CONCENTRATE ON PROFILE. " c) |8 I; ]9 i( z
NOTE : MUST SIGN AFIDAVIT .NO MORE THAN 12 HOURS ELAPSED BETWEEN GRIT BLAST AND PAINT.7 Q, O" D) m$ o$ i& V
4.CLEAN OFF ALL DUST WITH A VACUUM.* c3 J( \+ f2 o, j( a
5.APPLY ONE COATING OF TNEMEC 140-1255(BEIGE) POLYAMIDOAMINE EPOXY ,PRIMER COAT ALL OVER 4 MILS DRY FILM THICKNESS 7 MILS WET FILM THICKNESS
0 Q! ~+ q& n8 [) A/ U6 e0 c3 a0 m( s6.FILL OUT PAINT QUALITY ASSURANCE FORM .
' X6 {. [) i k: F7 d7.AFTER PAINT IS DRY REMOVE THE MASKING." }9 H c3 ^. q1 ?' x
大家好，上面7句是關(guān)于油漆的說明，有哪位仁兄能幫忙翻譯以下，特別是第3，4，5，6條。小弟在此感激不盡 |
|
發(fā)表于 2009-11-28 10:03:28
QQ好友和群
QQ空間